Questions? 916-760-4524

8" Deringer 20

The 8" Deringer 20 Double Check prevents non-health hazard pollutants from entering a potable water supply system when backpressure and/or backsiphonage conditions occur.
    The smallest,
    lightest,
    most economical,
    best performing,
    and only all stainless steel
    backflow preventer. Period.
Approvals
Approved in the Horizontal & Vertical Up Position.

Important Note: Install with FLEX Couplings or Flange Adapters Only. DO NOT use RIDGED Couplings!

MSRP:

$4,209.00

Pro Price:

$3,369.00

The Deringer 20 Double Check Valve Assembly is designed to prevent non-health hazard pollutants from entering the potable water supply system caused by backpressure and/or backsiphonage conditions.

Maximum Working Pressure:
175psi (12.1 bar)
Temperature Range:
33° - 140°F (1° - 60°C)
End Connections
- IPS Groove for Steel Pipe:
AWWA C606
- Flange Adapters:
ANSI B16.1 Class 125
Lead Free:
0.25% Maximum by Weight

Flow Performance

Measures &  Materials

Valve Housing:
304 Stainless Steel
Valve Cover:
304 Stainless Steel
SOV Disks:
EPDM/304SS:
SOV Shafts:
304 Stainless Steel
SOV Bearings:
Teflon/Bronze
Non Wetted Bolts:
Grade 8 Zinc Plated
Check Disks:
Silicone
Wetted Fasteners:
18-8 Stainless Steel
Check Springs:
17-7 Stainless Steel
Check Pins:
17-7/18-8 Stainless Steel
Check Seats:
Noryl Polymer
O-Rings:
Buna-N

Engineering &  Specifications

The Deringer 20 Double Check (DC) valve shall utilize two independent Dual Action Check modules and two integral resiliently seated shut-off valves all of which shall be contained within a single rigid valve housing constructed entirely of 304 stainless steel. Both integral shutoff valves shall include pre-wired supervisory tamper switches contained within a weatherproof actuator housing approved for both indoor and outdoor use. Dual Action Check modules shall operate as a “poppet style” check under low flow conditions, operate as a “swing style” check under high flow conditions and utilize replaceable silicone elastomer sealing discs. Assembly test cocks shall be handle-less and operate via a tamper resistant actuator. Assembly shall have a single full access service port and cover with an “inline” replaceable elastomer seal. Assembly shall be serviceable without special tools and approved for both horizontal and vertical applications.

TECHNOLOGY

Top

Dual-Action™  2nd Check Modules

The Patented Dual-Action Check™ ( US8875733) is the core technology behind the superior performance of Deringer Backflow Prevention Product Line. The Dual-Action Check™ combines all of the best features of industry standard “poppet” checks and “swing” checks into a single high performance check module.

•Light weight engineered polymer components
•Modular for easy removal of complete check from body.
•Easily disconnect spring tension for safe check servicing.
•Replaceable Silicone Rubber Elastomer Disk.
•Excellent resistance to fouling

Skewed View
Low Flow Poppet Action

Poppet Action

Features:

•Initial 25% of check stroke is that of a poppet check
•Consistent static sealing
•Excellent resistant to fouling
•Reliable check closure
•Stable flow characteristics at lower flow rates

Swing Action

Features:

•Final 75% of check stroke is that of a swing check
•Minimal friction loss at high flow rates
•More linear flow path water through valve

High Swing Action

Bow-Seal™  Full Access Cover

Bow Seal 1
Bow Seal 3

The Patented Bow-Seal™ Full Access Cover ( US8844562) is pre-formed to cylindrical shape friendly to high fluid pressure. This allows the cover to be much thinner and lighter than traditional flat covers while still providing FULL and EASY access to Dual Action™ Check Modules. Additional features include:

• Light weight
• Simple removal
• No sliding seals
• Full access to valve internals
• No cumbersome and heavy couplings

Bow Seal 2
Bow Seal 4

Eccentric-Seal™  Shut Off- Valve

The only large diameter STAINLESS STEEL shutoff valve in the Backflow Industry. The Patented Eccentric-Seal™ Shut Off Valve ( US8887756) has a unique feature in that the inlet shutoff valve sealing disk seals on the downstream side of the valve operation shaft. This allows the #1 test cock to be located adjacent to the valve operation shaft reducing the overall length of the valve (and weight) by at least 2 inches. Additional features and benefits include:

• ONLY STAINLESS STEEL SHUTOFF VALVES IN BACKFLOW!
• Self-centering disk seal
• Bolt-on replaceable shutoff disks
• Low torque valve operation
• Disk replacement does not require elastomer compression
• Elimination of seal around valve shaft
• Stainless steel shutoff disk
• The entire valve operation shaft is a single component




Eccentric Seal Shut Off Valve 1

Tamper Resistant  Test Cock

The Deringer tamper resistant ½” and ¾” ball valves are the first handle-less test cocks found on large diameter backflow devices in the industry. The top of the valve actuation stem has a unique shape that uses an independent custom wrench to open and close test cocks. All test cocks are lead free and meet the SDWA requirements.

DOWNLOADS

Top

Specification  Sheets

Maintanence  Instructions

More Information
TItle Default Store View
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov     Copyright © 2018 BackFlowDirect LLC, All Rights Reserved.